Stromberg tools & other products 

Important stuff for your Stromberg installations.
To order, you can add products to your Wishlist, then email it to a dealer:
$12.95
Stromberg-97 - Jets, tools and other products - 29447KStromberg-97 - Jets, tools and other products - 29447K
29447K

Carb blank off plate 

Want to keep a carb or two out of action? Slip this thin stainless plate between the carb and gasket. It's shaped to fit the carburetor base footprint, but it's smaller so it all but disappears. You don't need extended intake studs either.
$25.95
Stromberg-97 - Jets, tools and other products - 39447KStromberg-97 - Jets, tools and other products - 39447K
39447K

Phenolic carburetor spacer - 1/4in 

Helping prevent heat transfer between intake and carburetor, our traditionally styled spacer comes with two gaskets - needs extended intake manifold studs (89064K-E) for each carb.
$12.95
Stromberg-97 - Jets, tools and other products - 89067K-3Stromberg-97 - Jets, tools and other products - 89067K-3
89067K-3

Manifold stud kit (3) 

Three intake manifold studs with stainless lock washers and nuts.
$16.95
Stromberg-97 - Jets, tools and other products - 89067K-4Stromberg-97 - Jets, tools and other products - 89067K-4
89067K-4

Manifold stud kit (4) 

Four intake manifold studs with stainless lock washers and nuts.
$13.95
Stromberg-97 - Jets, tools and other products - 89067K-EStromberg-97 - Jets, tools and other products - 89067K-E
89067K-E

Extended intake manifold stud kit (3) 

Fitting some Stromberg Phenolic spacers (39447k)? Then you will need these 1/4in extended intake manifold studs. Comes with stainless nuts and lock washers, of course.
$29.95
Stromberg-97 - Jets, tools and other products - 9071KStromberg-97 - Jets, tools and other products - 9071K
9071K

Premium jet wrench 

Stainless steel with knurls for good grip and a CNC milled end for a super fit. Cheaper wrenches have a punched end. This will last a lifetime.
$149.00
Stromberg-97 - Jets, tools and other products - 9514-VPStromberg-97 - Jets, tools and other products - 9514-VP
9514-VP

New 97 base with vacuum port 

A new 97 base (throttle body) with specially designed brass fitting to provide ported vacuum advance for your distributor - complete with new throttle shaft, bushes and plates, new kicker and choke lever, idle mixture screws and springs and gaskets.
$9.95
Stromberg-97 - Jets, tools and other products - 9533K-33Stromberg-97 - Jets, tools and other products - 9533K-33
9533K-33

Main jets - 0.033in 

Fits Stromberg 97, 81, 48, 40, LZ and other models. Two jets. Installs with Genuine Stromberg jet wrench - 9071K. Click on Tech Center for jetting advice.
$9.95
Stromberg-97 - Jets, tools and other products - 9533K-34Stromberg-97 - Jets, tools and other products - 9533K-34
9533K-34

Main jets - 0.034in 

Fits Stromberg 97, 81, 48, 40, LZ and other models. Two jets. Installs with Genuine Stromberg jet wrench - 9071K. Click on Tech Center for jetting advice.
$9.95
Stromberg-97 - Jets, tools and other products - 9533K-35Stromberg-97 - Jets, tools and other products - 9533K-35
9533K-35

Main jets - 0.035in 

Standard factory jetting for Stromberg 81 carburetor at sea level. Two jets. Installs with Genuine Stromberg jet wrench - 9071K. Click on Tech Center for jetting advice.
$9.95
Stromberg-97 - Jets, tools and other products - 9533K-36Stromberg-97 - Jets, tools and other products - 9533K-36
9533K-36

Main jets - 0.036in 

Fits Stromberg 97, 81, 48, 40, LZ and other models. Two jets. Installs with Genuine Stromberg jet wrench - 9071K. Click on Tech Center for jetting advice.
$9.95
Stromberg-97 - Jets, tools and other products - 9533K-37Stromberg-97 - Jets, tools and other products - 9533K-37
9533K-37

Main jets - 0.037in 

Fits Stromberg 97, 81, 48, 40, LZ and other models. Two jets. Installs with Genuine Stromberg jet wrench - 9071K. Click on Tech Center for jetting advice.
$9.95
Stromberg-97 - Jets, tools and other products - 9533k-38Stromberg-97 - Jets, tools and other products - 9533k-38
9533k-38

Main jets - 0.038in 

Fits Stromberg 97, 81, 48, 40, LZ and other models. Two jets. Installs with Genuine Stromberg jet wrench - 9071K. Click on Tech Center for jetting advice.
$9.95
Stromberg-97 - Jets, tools and other products - 9533K-39Stromberg-97 - Jets, tools and other products - 9533K-39
9533K-39

Main jets - 0.039in 

Fits Stromberg 97, 81, 48, 40, LZ and other models. Two jets. Installs with Genuine Stromberg jet wrench - 9071K. Click on Tech Center for jetting advice.
$9.95
Stromberg-97 - Jets, tools and other products - 9533K-40Stromberg-97 - Jets, tools and other products - 9533K-40
9533K-40

Main jets - 0.040in 

Fits Stromberg 97, 81, 48, 40, LZ and other models. Two jets. Installs with Genuine Stromberg jet wrench - 9071K. Click on Tech Center for jetting advice.
$9.95
Stromberg-97 - Jets, tools and other products - 9533K-41Stromberg-97 - Jets, tools and other products - 9533K-41
9533K-41

Main jets - 0.041in 

Fits Stromberg 97, 81, 48, 40, LZ and other models. Two jets. Installs with Genuine Stromberg jet wrench - 9071K. Click on Tech Center for jetting advice.
$9.95
Stromberg-97 - Jets, tools and other products - 9533K-42Stromberg-97 - Jets, tools and other products - 9533K-42
9533K-42

Main jets - 0.042in 

Fits Stromberg 97, 81, 48, 40, LZ and other models. Two jets. Installs with Genuine Stromberg jet wrench - 9071K. Click on Tech Center for jetting advice.
$9.95
Stromberg-97 - Jets, tools and other products - 9533K-43Stromberg-97 - Jets, tools and other products - 9533K-43
9533K-43

Main jets - 0.043in 

Fits Stromberg 97, 81, 48, 40, LZ and other models. Two jets. Installs with Genuine Stromberg jet wrench - 9071K. Click on Tech Center for jetting advice.
$9.95
Stromberg-97 - Jets, tools and other products - 9533K-44Stromberg-97 - Jets, tools and other products - 9533K-44
9533K-44

Main jets - 0.044in 

Fits Stromberg 97, 81, 48, 40, LZ and other models. Two jets. Installs with Genuine Stromberg jet wrench - 9071K. Click on Tech Center for jetting advice.
$9.95
Stromberg-97 - Jets, tools and other products - 9533K-45Stromberg-97 - Jets, tools and other products - 9533K-45
9533K-45

Main jets - 0.045in 

Standard factory jetting for Stromberg 97 carburetor at sea level. Two jets. Installs with Genuine Stromberg jet wrench - 9071K. Click on Tech Center for jetting advice.
$9.95
Stromberg-97 - Jets, tools and other products - 9533K-46Stromberg-97 - Jets, tools and other products - 9533K-46
9533K-46

Main jets - 0.046in 

Fits Stromberg 97, 81, 48, 40, LZ and other models. Two jets. Installs with Genuine Stromberg jet wrench - 9071K. Click on Tech Center for jetting advice.
$9.95
Stromberg-97 - Jets, tools and other products - 9533K-47Stromberg-97 - Jets, tools and other products - 9533K-47
9533K-47

Main jets - 0.047in 

Fits Stromberg 97, 81, 48, 40, LZ and other models. Two jets. Installs with Genuine Stromberg jet wrench - 9071K. Click on Tech Center for jetting advice.
$9.95
Stromberg-97 - Jets, tools and other products - 9533K-48Stromberg-97 - Jets, tools and other products - 9533K-48
9533K-48

Main jets - 0.048in 

Standard factory main jets for Stromberg 48 and 40 carburetors at sea level. Two jets. Installs with Genuine Stromberg jet wrench - 9071K. Click on Tech Center for jetting advice.
$9.95
Stromberg-97 - Jets, tools and other products - 9533K-49Stromberg-97 - Jets, tools and other products - 9533K-49
9533K-49

Main jets - 0.049in 

Fits Stromberg 97, 81, 48, 40, LZ and other models. Two jets. Installs with Genuine Stromberg jet wrench - 9071K. Click on Tech Center for jetting advice.
$9.95
Stromberg-97 - Jets, tools and other products - 9533K-50Stromberg-97 - Jets, tools and other products - 9533K-50
9533K-50

Main jets - 0.050in 

Fits Stromberg 97, 81, 48, 40, LZ and other models. Two jets. Installs with Genuine Stromberg jet wrench - 9071K. Click on Tech Center for jetting advice.
$6.95
Stromberg-97 - Jets, tools and other products - 9537K-LStromberg-97 - Jets, tools and other products - 9537K-L
9537K-L

Choke lock detent kit 

Most Strombergs – even in multiples - run better with the choke plates in. But who needs rattling levers? Lock them open with this clever detent pin – press one end into your choke lever, and the other end into your spring then install it into the airhorn just like the stock item.
$12.95
Stromberg-97 - Jets, tools and other products - 9594K-60Stromberg-97 - Jets, tools and other products - 9594K-60
9594K-60

Power valve - No.60 

Fits Stromberg 97, 81, 48, 40, LZ and other models. Comes with new fibre gasket. Click on Tech Center for jetting advice.
$12.95
Stromberg-97 - Jets, tools and other products - 9594K-61Stromberg-97 - Jets, tools and other products - 9594K-61
9594K-61

Power valve - No.61 

Fits Stromberg 97, 81, 48, 40, LZ and other models. Comes with new fibre gasket. Click on Tech Center for jetting advice.
$12.95
Stromberg-97 - Jets, tools and other products - 9594K-62Stromberg-97 - Jets, tools and other products - 9594K-62
9594K-62

Power valve - No.62 

Fits Stromberg 97, 81, 48, 40, LZ and other models. Comes with new fibre gasket. Click on Tech Center for jetting advice.
$12.95
Stromberg-97 - Jets, tools and other products - 9594K-63Stromberg-97 - Jets, tools and other products - 9594K-63
9594K-63

Power valve - No.63 

Standard factory power valve (power by-pass jet), with new fibre gasket, for Stromberg 48 and 40 carburetors at sea level. Also fits Stromberg 97, 81, LZ and other models. Click on Tech Center for jetting advice.
$12.95
Stromberg-97 - Jets, tools and other products - 9594K-64Stromberg-97 - Jets, tools and other products - 9594K-64
9594K-64

Power valve - No.64 

Fits Stromberg 97, 81, 48, 40, LZ and other models. Comes with new fibre gasket. Click on Tech Center for jetting advice.
$12.95
Stromberg-97 - Jets, tools and other products - 9594K-65Stromberg-97 - Jets, tools and other products - 9594K-65
9594K-65

Power valve - No.65 

Standard factory power valve (power by-pass jet), with new fibre gasket, for Stromberg 97 carburetor at sea level. Also fits Stromberg 48, 81, 40, LZ and other models. Click on Tech Center for jetting advice.
$12.95
Stromberg-97 - Jets, tools and other products - 9594K-66Stromberg-97 - Jets, tools and other products - 9594K-66
9594K-66

Power valve - No.66 

Fits Stromberg 97, 81, 48, 40, LZ and other models. Comes with new fibre gasket. Click on Tech Center for jetting advice.
$12.95
Stromberg-97 - Jets, tools and other products - 9594K-67Stromberg-97 - Jets, tools and other products - 9594K-67
9594K-67

Power valve - No.67 

Fits Stromberg 97, 81, 48, 40, LZ and other models. Comes with new fibre gasket. Click on Tech Center for jetting advice.
$12.95
Stromberg-97 - Jets, tools and other products - 9594K-68Stromberg-97 - Jets, tools and other products - 9594K-68
9594K-68

Power valve - No.68 

Fits Stromberg 97, 81, 48, 40, LZ and other models. Comes with new fibre gasket. Click on Tech Center for jetting advice.
$12.95
Stromberg-97 - Jets, tools and other products - 9594K-69Stromberg-97 - Jets, tools and other products - 9594K-69
9594K-69

Power valve - No.69 

Fits Stromberg 97, 81, 48, 40, LZ and other models. Comes with new fibre gasket. Click on Tech Center for jetting advice.
$12.95
Stromberg-97 - Jets, tools and other products - 9594K-70Stromberg-97 - Jets, tools and other products - 9594K-70
9594K-70

Power valve - No.70 

Fits Stromberg 97, 81, 48, 40, LZ and other models. Comes with new fibre gasket. Click on Tech Center for jetting advice.
$12.95
Stromberg-97 - Jets, tools and other products - 9594K-71Stromberg-97 - Jets, tools and other products - 9594K-71
9594K-71

Power valve - No.71 

Standard factory power valve (power by-pass jet), with new fibre gasket, for Stromberg 81 carburetor at sea level. Also fits Stromberg 97, 48, 40, LZ and other models. Click on Tech Center for jetting advice.
Not found what you wanted? Click on another tab
View your WishlistWhat is a WishlistEmail a link to this page to a friendPrint this page